Search results for "Passive cooling"
showing 10 items of 18 documents
Thermo-Hydraulic Modelling and Experimental Validation of an Electro-Hydraulic Compact Drive
2021
Electro-hydraulic compact drives (ECDs) are an emerging technology for linear actuation in a wide range of applications. Especially within the low power range of 5–10 kW, the plug-and-play capability, good energy efficiency and small space requirements of ECDs render this technology a promising alternative to replace conventional valve-controlled linear drive solutions. In this power range, ECDs generally rely on passive cooling to keep oil and system temperatures within the tolerated range. When expanding the application range to larger power classes, passive cooling may not be sufficient. Research investigating the thermal behaviour of ECDs is limited but indeed required for a successful …
COOLING OF COMMERCIAL BUILDINGS BY MEANS OF LARGE COLD RADIANT CEILINGS
1991
ABSTRACT The possibility of using different cooling tools working with lower radiant temperatures and higher air velocity is explored. Lower energy consumptions may be achieved in specific climates with reasonable levels of thermal comfort.
Analytical studies of the Sirocco room of Villa Naselli-Ambleri: A XVI century passive cooling structure in Palermo (Sicily)
2015
Abstract This work focuses on a passive cooling architecture particularly popular from the Renaissance in Palermo area, as building sumptuous suburban villas became a real hobby for the Sicilian aristocracy. A Sirocco room is an artificial subterranean construction, built close to a water spring in order to reproduce the pleasant conditions of freshness that could be experienced in a natural cavern. In these places, nobles used to spend their time with friends to escape from the hot summer. The room of Villa Naselli-Ambleri is nowadays the best preserved in Palermo thanks to its owners’ conservation care and it is unique for its cooling operating principle. The above-mentioned consideration…
Architectural technologies for life environment: passive cooling strategies in the architectures of the Mediterranean area.
2020
The Mediterranean area is a highly interesting place where various States, characterised by different people, histories, and cultures face. Reigns, religions, powers, state structures, people, nationalities, etc., everything seems to be extremely different and far. On the contrary, there are some cultural points that are much closer than they officially appear. Indeed, historically, the commercial trades between the various countries have always been highly intense and the Christian and Muslim reigns, even if in a continuous state of conflict, were reciprocally linked by deep (financial) interests. Therefore, that translated in a wide trade of goods that moved on the Mediterranean Sea acros…
Natural Convection Cooling of a Hot Vertical Wall Wet by a Falling Liquid Film
2008
Abstract The system studied is a plane channel in which one of the two vertical walls is kept at an arbitrary temperature profile and may be partially or completely wet by a falling liquid film, while the opposite wall is adiabatic. Air from the environment flows along the channel with a mass flow rate which depends on the balance between hydraulic resistances and buoyancy forces. These latter, in their turn, depend on the distribution of temperature and humidity (hence, density) along the channel and eventually on the heat and mass transferred from wall and film to the humid air. A simplified computational model of the above system was developed and applied to the prediction of relevant qu…
Eurofusion-DEMO Divertor - Cassette Design and Integration
2020
International audience; The Eurofusion-DEMO design will complete the Pre Conceptual Design phase (PCD) with a PCD Gate, named G1, scheduled to take place in Q4 2020 that will focus on assessing the feasibility of the plant and its main components prior to entering into the Conceptual Design phase. In the paper first an overview is given of the Eurofusion-DEMO Divertor Assembly including design and interface description, systems and functional requirements, load specification, system classification, manufacturing procedures and cost estimate. Then critical issues are discussed and potential design solutions are proposed, e.g.:- Neutron material damage limits of the different (structural) mat…
Numerical Modelling of Room Thermal Comfort Conditions
2006
Particular heat transfer coefficients of building elements gives quantitative notion only about heat losses through this building element. Analysis of the overall heat balance and heat losses of complete building and study of particular contribution of building elements in overall balance allows one to figure out the state of the building and find the building elements of bounding construction with most significant heat losses. Project variants of the buildings (or rebuilding in case of renovation), which ensure the desirable economy of energy and proportions of investments can be find varying the proportions of the surface area of building elements (e.g., windows and doors). A lot of facto…
APPLICATION OF MATHEMATICAL MODELS FOR THE SIMULATION OF THERMAL COMFORT CONDITIONS IN A LIVING ROOM
2005
The paper deals with the distributions of temperature and averaged turbulent airflows in living rooms in 2D and 3D approximations using Ansys/Flotran and Ansys/CFX software respectively. The distributions are calculated depending on the placement and temperature of heaters, heat transfer coefficients of the building structures and ventilation conditions. The authors analyse the influence of these factors on the air circulation and the related heat flows through building structures. The thermal balance of a room and its dependence on various external factors is also considered. As thermal comfort conditions’ parameters are analysed, the airflow velocities and indoor temperatures with its gra…
Thermal comfort condition assessment in test buildings with different heating/cooling systems and wall envelopes
2017
Abstract The main aim of this study is a comprehensive analysis of long-term monitoring data of thermal comfort and discomfort parameters in small identical test buildings equipped with different heating/cooling systems. Calculations of PPD index expressed the human perception of thermal comfort and such discomfort factors like draught rate and vertical air temperature difference are provided for the room in winter season running three different heating systems – electric heater, air-air heat pump and air-water heat pump, as well as for the summer cooling with split type air conditioning systems. It is shown that the type of heating/cooling system and its working regime has a significant im…
Thermal characterization of insulating materials
2018
Abstract The strict energy saving standards are based on the declared values of the materials, i.e. U-value, thermal conductivity or thermal capacity. To this end, proper knowledge of the thermophysical properties of the wall components is needed, especially with regard to new lightweight technologies that are being used in building construction/refurbishment, under the dynamic conditions of the Mediterranean climate, where one of most important parameters of building materials is their heat capacity because of the influence of solar radiation energy. With this regard, the actual heat capacity value, obtained in laboratory tests, is typically quite different from the nominal one. So, this p…